Foam Gun FG-01 yellow with two Attachment and Pressure regulator

This Foam Gun works on Air pressure with a Pneumatic line from an Air compressor. The “foam Gun” uses the air pressure from an air compressor to convert shampoo or any foamy product into unbelievable foam. The suds are so light and fluffy, that they cling to vertical surfaces without running off.

• When washing your vehicle, do you feel you don’t have adequate lubrication or cleaning power because the suds run off the paint? You’ll never experience that with this Auto Tool Foam Gun. The “foam Gun” allow you to presoak the vehicle with clinging foam. The foam stays where it’s sprayed. As you wash the vehicle, there is a layer of light foam between your mitt and the paint. With the Auto Tool Foam Gun, your shampoo foam won’t fall flat.
• This Auto Tool Foam Gun only works with an air compressor capable of producing 60-90 psi of air pressure. For optimal performance, this Auto Tool Foam Gun works best with an air compressor that produces 5 CFM or more at 90 psi. The higher the air pressure, the greater the foam generated by the Snow Gun. The unique barrel on the “Snow Gun” mixes the shampoo and pressurized air to create a blizzard of foam. The amount of foam is regulated by a pressure valve on the gun. Use as little or as much foam as you need. You’ll be amazed!
• This Auto Tool Foam Gun can be used with any foaming cleaner, such as car shampoos, carpet and upholstery cleaners, and non-acidic wheel cleaners.